ETC Cobalt 10 - Parameter Definitions; Parameter Definition Editor

Cobalt 8.1 - 20181029
310
Parameter Definitions
Parameter types are defined in the first cell or the Template Editor.
Each parameter is used differently. For example, Pan and Tilt automatically belong to Focus Palettes,
and are mapped to the trackball in Parameter mode.
Press MODIFY in the Parameter cell to open the dropdown. Select with arrow keys (or use the first
letter from the keyboard) and press MODIFY to confirm.
The Parameters are picked from the Parameter Definition Editor. Parameters can be added to this list
if necessary. See Parameter Definition Editor
.
Parameter Definition Editor
The complete Parameter Definition Editor contains all to this point known parameters. (Browser
>Patching >Settings & Tools >Parameter Definitions)