Cobalt 8.1 - 20181029
134
Dimmer/Device Feedback Log
The Dimmer/Device feedback log (Browser >About) will show all logged dimmer feedback messages
from:
• RDM
• CEM3
• FDX
• CEM+
• Dimstat
Features
• The Active column shows if the error is active or if it has been cleared. You can also reset a
known error (to get rid of the indication on the channel) by toggling the Active field.
• Select one or more rows in the Dimmer Feedback Log and press DELETE to remove them
from the list.
• If general dimmer errors are active, there is a warning sign in the title bar (see below).
In the Header bar on top of the screens, the warning sign indicator will show dimmer and/or other
faults in the format: General Errors/Dimmer Errors. Active errors are marked with red. A column
“Type” will show the source of the error.
To Next Page
Loading...
