ETC Cobalt 10 - Console Key - MASK; Console Key - MASTER; Console Key - MASTER KEYS

Cobalt 8.1 - 20181029
906
For more information see Active Mode & Mark.
There is no keyboard equivalent.
Console Key - MASK
The MASK key is used in combination with other keys to toggle the mask functions that mask device
parameters from recording.
• [MASK] - Activate the mask.
• [MASK] & [FOCUS, COLOR, BEAM] - Toggle these parameter groups on/off.
• [MASK] & [wheel parameter key] - Toggle this specific parameter on/off.
• [MODIFY] & [MASK] - Open the Mask editor.
• [RECORD] & [MASK] - Records the next free user mask
• [#] [RECORD] & [MASK] - Records user mask #
• [#] & [MASK] - Recalls the settings of Mask # to the global mask
• [MASK] & [Master_key] - Assign global mask to a master.
For more information see Device Control - Mask
.
Keyboard equivalent: [K]
Console Key - MASTER
The MASTER key is used to open the Master List editor where you can see and control the master
fields.
• [MASTER] - Open the Master view. When the Master view is open, you can enter a number
and press MASTER to control that master with the level wheel.
• [SETUP] & [MASTER] - Opens settings for this key.
• [MODIFY] & [MASTER] - Opens the master list.
For more information see Master View - Select And Set Levels
.
Keyboard equivalent: [ALT] & [M]
Console Key - MASTER KEYS
Every master has a master key that is used to load content to the master, and for some settings.
• [#] [PRESET] & [master key] - Load this content to master #.
• [#] [GROUP] & [master key] - Load this content to master #.
• [#] [CHANNEL] & [master key] - Load this content to master #.
• [#] [SEQ] & [master key] - Load this content to master #.
• [#] [FOCUS] & [master key] - Load this content to master #.
• [#] [COLOR] & [master key] - Load this content to master #.