Cobalt 8.1 - 20181029
800
Mask in masters
A mask is either set up from the Master List in the Mask column, or by copying the global Mask to a
master by holding MASK and pressing the Master key.
Every master has a mask that you can define per parameter. The mask will inhibit the playback of
those parameters from that master. The same content on a different unmasked master will play back
all of its content. You can use playback masks to reuse content for different purposes, or to keep
parameters from playing back, without having to edit those parameters out of the content.
You can also assign any user mask from the Mask list by entering # holding MASK and pressing the
Master Key. See Device Control -
Mask.
The mask is indicated in the master display and the Masters tab .
Masters - Clear
Hold C/ALT and press a Master Key to clear its content.
&
To Next Page
Loading...
