ETC Cobalt 10 - Console Key - FORMAT; Console Key - GO; Console Key - GO (Master Playback)

Cobalt 8.1 - 20181029
898
• [FOCUS_MODE] - Enters Focus mode.
For more information see Device Palettes - Focusing Mode
.
There is no keyboard equivalent.
Console Key - FORMAT
The FORMAT key is a vital part of controlling what is shown in all views except spreadsheets (lists).
It is used a lot in combination with the arrow keys, and the level wheel.
• [FORMAT] - Change channel sorting (all channels, non-zero channels etc) for the current
channel view.
• [FORMAT] & [level wheel] - Zoom in channel and attribute views.
• [FORMAT] & [up/down arrows] - Compress/expand information in a view.
For more information see Navigating - Channel Views
.
Keyboard equivalent: [F4]
Console Key - GO
The GO key starts the next crossfade in the Main Playback.
• [GO] - Start a crossfade in the Main Playback. Press GO during an ongoing crossfade in the
Main Playback to start the next one.
• [SETUP] & [GO] -Change default times and crossfade settings.
For more information see Main Playback - Transport Keys
.
Keyboard equivalent: [CTRL] & [G]
Console Key - GO (Master Playback)
This GO key in the Master Playback starts the next crossfade in the master/sequence connected to the
Master Playback.
• [GO] - Start a crossfade in the connected master. Press GO during an ongoing crossfade in
the connected master to start the next one.
For more information see Master Playback - Playback Keys
.
There is no keyboard equivalent