ETC Cobalt 10 - Console Key - PLAYLIST; Console Key - PLUS; Console Key - PLUS PERCENT (+%)

Cobalt 8.1 - 20181029
914
• [#] [PLAYBACK] - Open the Sequence editor for the sequence in the Main Playback at
Preset/Step #.
• [#] [MODIFY] [PLAYBACK] - Open the Sequence editor for the sequence in the Main
Playback at Preset/Step #.
For more information see Live
.
Keyboard equivalent: [X]
Console Key - PLAYLIST
The PLAYLIST key is used to activate the Playlist for the Main Playback.
• [PLAYLIST] - toggles the Playlist on/off.
For more information see Playlist
.
Keyboard equivalent: None
Console Key - PLUS
The PLUS key (+) is part of the channel select keys. It is used to add a channel to the current
selection. It is also used for the Channel Check function.
• [#] [+] - Add the channel to the current selection, (if the console is set to operate in At Mode
press MINUS and then enter the number).
• [C/Alt] & [+] - Make a channel check to the next channel with the current level.
• Hold [+] & [master key] - Add the channels in that master from the current selection.
• [#] [GROUP] & [+] - Add the channels in that Group from the current selection
• [#] [PRESET] & [+] - Add the channels in that Preset from the current selection
For more information see Select Channels
.
Keyboard equivalent: [CTRL] & [>]
Console Key - PLUS PERCENT (+%)
The PLUS PERCENT key (+%) is part of the channel level keys. It is used to add 5% (default) from
the current selection. It is also used for setting a selection to full in combination with the C/ALT key.
• [+%] - Add 5% from the current channel selection..
• [#] [+%] - Select a channel and add 5%.
• [C/Alt] & [+%] - Flash the current selection to 100% (master content will not be affected).
• [#] [.] & [+%] - Add that level from the current channel selection.
• [SETUP] & [+%] - Change the default level.