ETC Cobalt 10 - Dynamic Wheels - Size, Rate, Offset & Delay; Keep Dynamics in Next Preset; Set Distance in

Cobalt 8.1 - 20181029
732
Dynamic Wheels - Size, Rate, Offset & Delay
Wheels 1 and 2 are used to set Size and Rate for Live Dynamics. See Dynamics - Size & Rate.
• Select channels and set values.
• Set numerical values with # and Wheel Key.
Wheels 3 and 4 are used to set Offset and Delay relations. See Dynamics - Relations & Distance
.
• Hold the key and use the wheel.
Keep Dynamics In Next Preset
The KEEP DYNAM soft key is used to record a new base position for a running Dynamic Effect. See
Record Keep Dynamics (New Base Value)
.
Set Distance In %
The DISTANCE soft key is used to set the Distance % parameter for the selected running Dynamics
directly. See Dynamics - Relations & Distance.