ETC Cobalt 10 - Dynamics - Start; Start Dynamics by Number; Start Dynamics from the Effect Library Tab

Cobalt 8.1 - 20181029
729
Dynamics - Start
Dynamics are activated for the currently selected channel(s). The current attribute and intensity values
are used as the Base Value for the Dynamic Effect.
A "D" will appear in the top right corner of the channel symbol.
NOTE
Activating a Dynamic Effect will "lock" the attributes and intensities of the
selected channels to the Dynamic Effect.
See Dynamics - Stop.
Start Dynamics By Number
Function Key Feedback
Start Dynamic Effect #
[#] [DYN_EFFECT]
Dynamic Effect # is
activated for the currently
selected channel(s).
Start Dynamics From The Effect Library Tab
Action Key Feedback
1. Open Effect Library
[MODIFY] &
[DYN_EFFECT]
The Effect Library tab is
opened.
2. Select Effect Arrow Keys Up/Down The selected Effect is
highlighted.
3. Start Effect
[MODIFY]
The selected Effect is
activated for the currently
selected channel(s).
4. Exit Effect Library
[ESC]
The Effect Library tab is
closed.