ETC Cobalt 10 - Set;Clear Patch or Rename

Cobalt 8.1 - 20181029
272
NOTE
Patched devices are automatically set to default values.
See Home Positioning.
NOTE
As soon as a moving device is patched, the channel symbol in the channel
views will get an extra field for moving device information.
Set/Clear patch or rename
You can reset (1:1) or clear the dimmer patch, the moving device patch, or the renaming system for
any channel range from # to #. If you check "Apply To All" you don't need to specify a range.
Unpatch All clears channel, device and name patch.