Cobalt 8.1 - 20181029
892
• [COLUMN] & [right/left arrows] - Move a column.
For more information see Navigating - Lists
, Change The List View, Sort By Column.
Keyboard equivalent: [F9]
Console Key - COMPARE
COMPARE is a soft key in the CHANNELS menu of the console main display. It is used to compare
the intensities in a channel view with any other Preset. It is a mode that has to be exited before
returning to normal operation.
• [COMPARE] - Load the last recorded preset that was loaded to this channel view. Press
again to return.
• [#] [COMPARE] - Load that preset to this channel view. Press again to return.
For more information see Presets - Compare Mode
.
There is no keyboard equivalent.
Console key - CONNECT
The CONNECT key is used to connect a Master with a Sequence to the Master Playback controls of
the console frontpanel. A Playback tab will be opened for this master. If the master is empty a
dialogue will open for choosing to create a Preset or Cue Sequence.
• [CONNECT] & [master key] - Connect.
• # [CONNECT] - Connects master #
• 0 [CONNECT] - Disconnects currently connected master
• [CONNECT] - Opens the playback view for the currently connected master
For more information see Master Playback - Playback Keys
.
There is no keyboard equivalent
Console Key - COPY/CUT
The COPY/CUT key is used to copy and cut information for pasting. Information that can be copied,
cut and pasted is Text, Sequence Steps (Sequence List), Groups (Group List), Presets (Preset List),
Device Templates (Device Template List) and Attributes in the Preset List.
• [COPY/CUT] - Copy the selected object.
• [COPY/CUT] [COPY/CUT] - Cut the selected object.
For more information see Copy, Cut & Paste
.
To Next Page
Loading...
