ETC Cobalt 10 - Console Key - solo; Console Key - START; Console Key - SWAP; Console Key - TAB

Cobalt 8.1 - 20181029
923
For more information see Main Playback - Transport Keys.
There is no keyboard equivalent
Console Key - SOLO
The SOLO key is used to solo the output of a playback, temporarily muting the rest.
• [SOLO] & [PLAYBACK] - Toggles solo mode for the main playback.
• [SOLO] & [MasterKey] - Toggles solo mode for a master playback.
For more information see Mute & Solo - Solo
.
Keyboard equivalent: None
Console Key - START
The START key is used to start fades in any master playback.
• [#] [START] - Fade master # to full.
• [#] [START] & [master key] - Fade to this level.
• [START] & [master key] - Fade this master to full or zero.
For more information see Master Playbacks - Start Fades
.
There is no keyboard equivalent
Console Key - SWAP
Press the SWAP key to swap the top row with the lower row.
• [SWAP] - swaps fader content and levels between the upper and lower row.
For more information see Masters - Swap Upper/Lower
.
No keyboard equivalent
Console Key - TAB
The TAB key is a fundamental part of the Cobalt navigation. All views are opened in tabs, and the tab
key is used to select, move, organize and record these.
• [TAB] - Step between all open tabs.
• [#] [TAB] - Select this tab.