Cobalt 8.1 - 20181029
925
Keyboard equivalent: [/]
Console Key - TIME
The TIME key is used to set In/Out times to the sequence step in the A or B field of the Main
Playback (depending on the Time Settings).
• [#] [TIME] - Set an In/Out time to the next fade in the main playback.
• [#] [CHANNEL] & [TIME] - Set a channel time to the selected channel(s).
• [#] [TIME] & [FOCUS] - Set a parameter time.
• [#] [TIME] & [COLOR] - Set a parameter time.
• [#] [TIME] & [BEAM] - Set a parameter time.
• [#] [TIME] & [wheel parameter key] - Set a parameter time.
• [MODIFY] & [TIME] - Open the Time Editor for the step in A or B of the main playback.
Enter a number to open for a specific sequence step.
• [TIME] & [A] - Forces the setting "Times to A"
• [TIME] & [B] - Forces the setting "Times to B"
• [#] [TIME] & [Master_Key] - Set an In time to a Preset in that master.
For more information see Sequences - Times
, Sequence Times - Set To A or B, Master Playbacks -
Times, The Time Editor Popup.
Keyboard equivalent: [T]
Console Key - TRACK
The TRACK key is used to open the Track list for the selected channel(s). It is used in combination
with RECORD and UPDATE for track recording.
• [TRACK] - Open the Track list for the selected channels. You can change the channel
selection. Use FORMAT & FOCUS, COLOR, BEAM to open parameter columns.
• [TRACK] & [GROUP] - Track the current selection in all Groups.
• [TRACK] & [PRESET] - Track the current selection in all Presets.
• [TRACK] & [SEQ] - Track the current selection in all Sequences.
• [TRACK] & [PALETTE, FOCUS, COLOR, BEAM] - Track the current selection in all
corresponding palettes.
• TRACK] & [CHANNEL] - Track the current selection in the whole show.
For more information see Track List
.
In the Browser and Organizer:
• [TRACK] - Tracks the selected preset or palette in the Sequence loaded to the Main
Playback..
For more information see Navigate - Browser
and Organizer.
To Next Page
Loading...
