ETC Cobalt 10 - Console Key - Cobalt Encoder; Console Key - COLOR; Console Key - COLUMN

Cobalt 8.1 - 20181029
891
• [SET CHANGED] & [COLOR] - Set Colorparameters for the selected channels to not
changed.
• [SET CHANGED] & [BEAM] - Set Beam parameters for the selected channels to not
changed.
• [SET CHANGED] & [wheel parameter key] - Set this parameter for the selected channels to
changed.
For more information see Devices - Recording
.
There is no keyboard equivalent.
Console Key - Cobalt Encoder
The COBALT ENCODER keys are endless encoders that allow you to set values AND there is a click
in them that sets the field/parameter to zero/full or a value (#) similar to the Parameter Wheel Keys
.
• [ENCODER] (press) - set to 100/zero.
• [ENCODER] (turn) - set value.
• [#] [ENCODER] (press) - set to value.
For more information see Masters - Introduction
There is no keyboard equivalent
Console Key - COLOR
This key is used to record and recall Color palettes for moving devices.
• [RECORD] & [COLOR] - Record the next free palette for the currently selected devices.
• [#] [RECORD] & [COLOR] - Record a new palette for the currently selected devices.
• [#] [COLOR] - Recall a recorded palette for the currently selected devices.
• [MODIFY] & [COLOR] - Open the Color palette list.
• Hold [COLOR] - When COLOR is held, all existing palettes 1-40 can be accessed from the
direct select keys.
For more information see Devices - Palettes
, Record A Color Palette, Device Palettes - Direct Mode.
Keyboard equivalent: [ALT] & [C/Alt
Console Key - COLUMN
The COLUMN key is used for various functions in spreadsheet views.
• [COLUMN] - Select all cells downward in the current column.
• [COLUMN] & [level wheel] - Resize a column.
• [COLUMN] & [up/down arrows] - Sort the spreadsheet by the content of this column.