ETC Cobalt 10 - Home Functions for Effects; Load an Effect to a Master

Cobalt 8.1 - 20181029
682
Home functions for effects
A very useful function for effects is Home. You can store a home position for all parameters.
Action Key Feedback
Record HOME
[RECORD] &
[HOME_ATTRIB]
All current parameters of
the selected effect(s) are
recorded as a home
position.
HOME
[HOME] & [EFFECT]
All Effect Playbacks move
to their Home position. By
default, this will stop all
Content, Dynamic and
Image effects but does not
stop Chases.
Load an effect to a master
A single effect playback can be loaded to a master. This allows you to control the effect intensity with
the master fader. If you press the master key you will select the effect.
Action Key Feedback
Load effect
[#] [EFFECT] &
[master_key]
Effect # is loaded to master
#