Cobalt 8.1 - 20181029
522
Park - Introduction
The PARK key is used in combination with other keys to park data.
Park allows you to Park the output of any part of a channel or device at a constant value.
• Parked values are indicated with PARK in the Channel view and the Info box of the Browser
when the channel is selected.
• A parked channel or parameter can still be altered and recorded blind.
• Park can be held and used with
@LEVEL
CH
ATTRIB
FOCUS
COLOR
BEAM
U1-U3
Wheel parameter keys.
• There is a softkey UNPARK for unparking parts of a channel or device.
• In Live Attributes PARK and UNPARK are used for selected cells.
• There is a PARK tab for viewing and clearing Parked values. MODIFY & PARK.
• Keyboard equivalent = Z
NOTE
Park replaces the Constant feature of older versions than 4.2.
To Next Page
