Cobalt 8.1 - 20181029
233
Net3/ACN Device List
Lists all Net3 Devices in the network, and allows some editing. Cobalt servers and backups will
automatically connect to discovered CEM3s as it
does with CEM+s when it is configured to do so. Cobalt console will attempt re-connect CEM3s when
a network disconnect occurs as it does with CEM+s.
Press MODIFY to open the Net3/ACN Device List
HINTS (5.1)
RFR BaseStation and RFR Handheld devices are shown in the list.
RFR Host is shown as active.
To Next Page
Loading...
