Cobalt 8.1 - 20181029
243
NOTE
The default Users "Default" and "View" are defined to allow access to the
full system.
Create a User Login
User Logins are created in the User List.
1. Open the User List (BROWSER >General Settings >User List).
2. Press INSERT to create a new User.
3. Select the Name cell and press MODIFY to enter a text label.
4. Select Default Partition (press MODIFY in the Default Partition cell)
Allowed Partitions
When a new user is created, the Default Partition is set to ALL, and all Partitions are set as Allowed.
You can disallow Partitions for a User by pressing MODIFY in the Allowed Partitions cell - opening
the User Partition List.
To Next Page
Loading...
