Cobalt 8.1 - 20181029
1061
Example: Record in the Main Sequence
This is an example of the workflow for recording a new look in the sequence of the Main Playback.
1. Select the Live tab by pressing LIVE
2. Select channels 1-10 (no levels)
1 CH 10 THRU
3. Set a level with the level wheel
4. Press RECORD
This will give you the Record dialogue. The next free preset # will have been chosen
automatically for you. You can write a text label.
5. Confirm with RECORD
Depending on how your system is set up the lights on stage will be recorded in a preset or cue in the
sequence of the Main Playback.
Press GO BACK to fade to the previous look.
Press GO to fade back into the look you recorded.
Quit Example
To Next Page
