Cobalt 8.1 - 20181029
907
• [#] [BEAM] & [master key] - Load this content to master #.
• [#] [PALETTE] & [master key] - Load this content to master #.
• [C/Alt] & [master key] - Clear the contents of that master (with the exception of console key
functions).
• [MODIFY] & [master key] - Open the master editor.
• [SETUP] & [master key] - Opens the master settings.
• [master key] - Select the channels in the group or preset loaded to that master.
For more information see Master Playbacks - Load/Clear/Modify
.
Keyboard equivalent: [1]-[9] and [0] over the letter keys correspond to master keys 1-10
Console Key - MASTER PAGE
The MASTER PAGE key (Congo hardware only) is used to load a page of 20 masters to a master
row.
• [#] [MASTER PAGE ] - Load this page.
• [C/Alt] & [MASTER PAGE] - Clear the masters.
For more information see Master Pages
.
Keyboard equivalent: [M] (upper row) [CTRL] & [M] (lower row)
Console Key - MINUS
The MINUS key (-) is part of the channel select keys. It is used to subtract a channel from the current
selection. It is also used for the Channel Check function.
• [#] [-] - Deselect the channel,(if the console is set to operate in At Mode press MINUS and
then enter the number).
• [C/Alt] & [-] - Make a channel check to the previous channel with the current level.
• Hold [-] & [master key] - Subtract the channels in that master from the current selection.
• [#] [GROUP] & [-] - Subtract the channels in that Group from the current selection
• [#] [PRESET] & [-] - Subtract the channels in that Preset from the current selection
For more information see Select Channels
.
Keyboard equivalent: [CTRL] & [<]
Console Key - MINUS PERCENT (-%)
The MINUS PERCENT key (-%) is part of the channel level keys. It is used to subtract 5% (default)
from the current selection. It is also used for setting a selection to zero in combination with the C/ALT
key.
To Next Page
