ETC Cobalt 10 - Console Key - B; Console Key - BALANCE; Console Key - BANK; Console Key - BEAM

Cobalt 8.1 - 20181029
886
Keyboard equivalent: [I]
Console Key - B
This key opens the channel view for the B field of the Main Playback. The channel control will be
connected to the B field.
• [B] - Opens and selects the B tab.
• [TIME] & [B] - Forces the setting "Times to B"
For more information see Main Playback - Edit Keys
.
Keyboard equivalent: [B]
Console Key - BALANCE
The BALANCE key is a soft key in the CHANNELS menu of the console main display. It is used to
mute all channel intensities except the current selection, temporarily.
• [BALANCE] - Temporarily mutes all channel intensities except the current selection. Press
again to return.
• [SETUP] & [REM DIM] - Opens the dialogue to set this key as BALANCE.
For more information see Channels - Balance Mode
.
There is no keyboard equivalent.
Console Key - BANK
The BANK key is used to change bank of data in the Direct Select key sections.
Hold [BANK] - When this key is held, you can use the direct select keys to select a bank (1-10, 11-20
etc) for each section of direct select keys.
For more information see Direct Select - Content
.
There is no keyboard equivalent.
Console Key - BEAM
This key is used to record and recall Beam palettes for moving devices.
• [RECORD] & [BEAM] - Record the next free palette for the currently selected devices.
• [#] [RECORD] & [BEAM] - Record a new palette for the currently selected devices.