ETC Cobalt 10 - Console Key - FCB DELAY; Console Key - FCB TIME; Console Key - FLASH

Cobalt 8.1 - 20181029
896
For more information see Device Control - Fan, Device Times - Fan Times.
Keyboard equivalent: [CTRL] & [F]
Console Key - FCB DELAY
The FCB DELAYsoft key in the Times soft key page, is used to set a delay time to FCB for the
moving device channels.
• [#] [FCB_Delay] - Sets the FCB times to # for the moving device channels, in the A or B
field of the main playback depending on the settings for times.
For more information see Sequence Times - FCB Times
.
There is no keyboard equivalent
Console Key - FCB TIME
The FCB TIME soft key in the Times soft key page, is used to set a time to FCB for the moving
device channels.
• [#] [FCB_Time] - Sets the FCB times to # for the moving device channels, in the A or B field
of the main playback depending on the settings for times.
For more information see Sequence Times - FCB Times
.
There is no keyboard equivalent
Console Key - FLASH
The lower row of masters in the Cobalt console and the large fader wing of the Congo Jr are equipped
with two keys per master. The top key is the master key used to load content, and the lower key is a
flash key. The flash key can be set to different modes and levels.
• [Flash key] - Flash the content of a master.
• [SETUP] & [flash key] - Open settings for a master.
• [#] [FLASH MODE] & [flash key] - Set a flash level for a master.
For more information see Master Playbacks - Flash Keys
.
There is no keyboard equivalent