ETC Cobalt 10 - Device Palettes - Select Stored Channels

Cobalt 8.1 - 20181029
636
Device Palettes - Select Stored Channels
You can Select all channels that are stored in a Palette as Each Device.
NOTE
This is not possible for palettes stored as "Each Device Type", since no
specific channels are stored with them.
Function Key Feedback
Focus channels
[#] [CHANNEL] &
[FOCUS]
All channels stored in
Palette # are selected in the
active Channel View.
Color channels
[#] [CHANNEL] &
[COLOR]
All channels stored in
Palette # are selected in the
active Channel View.
Beam channels
[#] [CHANNEL] &
[BEAM]
All channels stored in
Palette # are selected in the
active Channel View.
Palette channels
[#] [CHANNEL] &
[PALETTE]
All channels stored in
Palette # are selected in the
active Channel View.