ETC Cobalt 10 - Sequences List - Columns

Cobalt 8.1 - 20181029
371
Sequences List - Columns
Column Input Function
Sequence
[MODIFY]
The number of this Step- cannot be edited. Press
MODIFY to open the Sequence List.
Text
[MODIFY]
Press MODIFY to activate and end text input.
This text is shown in the top of the Playback
views.
Mode
[MODIFY]
Toggles between Normal, Chase and Loop (7.3)
mode.
Rate
[#]
[MODIFY]
Speeds up the playback by #% (Chase mode).
Bounce
[MODIFY]
Sets playback to alternate continuously between
forward and reverse (Chase mode).
Reverse
[MODIFY]
Sets Playback in the reverse direction only
(Chase mode).
Single Shot
[MODIFY]
Sets Playback to one time (Chase mode).
BPM
[#]
[MODIFY]
Suppresses fade times and sets step time (wait)
to BPM # (Chase mode).
Master View:
Show Step
Numbers
[MODIFY]
Toggles how step numbers are shown for this
sequence in Master Views.
Cue
[MODIFY]
Shows if this sequence is set to Presets or Cues
(cannot be changed)