ETC Cobalt 10 - Device Palettes - Select Active Channels

Cobalt 8.1 - 20181029
635
Device Palettes - Select Active Channels
All channels currently referencing a Palette can be selected using the Direct Select keys for Palettes
(FOCUS, COLOR, BEAM, PALETTE), in combination with CHANNEL and ALL.
Palettes are selected from the Direct Selects for this function. See Direct Selects
.
Function Key Feedback
Select channels
[CHANNEL] &
[Direct_Select#]
All channels stored in
Palette # are selected in the
active Channel View.
Select channels over zero%
[ALL] &
[Direct_Select#]
All channels with a level
in the active Channel
View are selected .