ETC Cobalt 10 - Device Control - Home Positioning

Cobalt 8.1 - 20181029
585
Device Control - Home Positioning
The HOME ATTRIB key in the programming section allows you to set devices or parts of devices to
their home position. Home positioning of a device means setting all parameters (or part of them) to the
default values defined in the template of this device. Normally this means setting pan and tilt to 50%,
color to white and all other parameters to neutral. (See Devices - Templates
)
These functions apply to the currently selected channel(s)
Action Key Feedback
All attributes
[HOME_ATTRIB]
[HOME_ATTRIB]
All parameters are set to
home
Focus
[HOME_ATTRIB] &
[FOCUS]
Focus parameters are set to
home
Color
[HOME_ATTRIB] &
[COLOR]
Color parameters are set to
home
Beam
[HOME_ATTRIB] &
[BEAM]
Beam parameters are set to
home
Single parameters
[HOME_ATTRIB] &
[Wheel_Key]
Parameter # is set to home
Another way of doing the same thing
Action Key Feedback
Focus
[0] [FOCUS]
Focus parameters are set to
home
Color
[0] [COLOR]
Color parameters are set to
home
Beam
[0] [BEAM]
Beam parameters are set to
home
All attributes
[C/Alt] &
[ATTRIBUTES]
All parameters are set to
home