Cobalt 8.1 - 20181029
888
• [C/Alt] - Clear the last numeric entry.
• [C/Alt] [C/Alt] - Deselect all channels.
• [C/Alt] & [CHANNEL] - Clear the current channel selection and levels in the selected
channel view.
• [C/Alt] & [master key] - Clear that field.
• [C/Alt] & [PLAYBACK] - Clear the A field.
• [C/Alt] & [PAGE] - Clear the current master page.
• [C/Alt] & [+%] - Set 100%.
• [C/Alt] & [-%] - Set 0%.
• [C/Alt] & [+] or [-] - Activate channel check mode with the current level.
• [ESC] & [C/Alt] - Lock/Unlock the console.
For more information see Channels - Clear Functions
, Master Playbacks - Load/Clear/Modify.
Keyboard equivalent: [Backspace]
Console Key - CAPTURE
This key is used to activate Capture mode, in which any channel that is manually altered will be
Captured, and cannot be controlled from any other function until it is released from Capture mode.
Captured channels are indicated with a red background in the channel views. When you record a
captured channel, the captured levels are stored.
• [CAPTURE] [CAPTURE] - Activate and deactivate Capture mode.
• [#] [CAPTURE] & [CHANNEL] - Capture that channel without activating Capture mode.
• [CAPTURE] & [ATTRIB] - Capture all attributes for the selected channel(s).
• [CAPTURE] & [parameter key] - Capture that attribute for the selected channel(s).
For more information see Channels - Capture Mode
.
Keyboard equivalent: [C]
Console Key - CH ONLY MODE
The CH ONLY MODE key is used to activate the Channels Only Mode for the console, providing a
single scene single channel control for simple hands on. The patch is active.
• [CH_ONLY_MODE] - Toggles Channels Only Mode on/off.
For more information see Channels - Ch Only Mode.
Keyboard equivalent: [-] & [+] on the numerical keypad
To Next Page
Loading...
