ETC Cobalt 10 - Console Key - GO BACK; Console Key - GO BACK (Master Playback); Console Key - GOTO; Console Key - GROUP

Cobalt 8.1 - 20181029
899
Console Key - GO BACK
The GO BACK key starts a crossfade to the previous sequence step in the Main Playback.
• [GO BACK] - Start a crossfade to the previous sequence step in the Main Playback. Press
GO BACK during an ongoing crossfade to reverse it.
• [SETUP] & [GO BACK] - Change default times.
For more information see Main Playback - Transport Keys
.
Keyboard equivalent: [CTRL] & [B]
Console Key - GO BACK (Master Playback)
The GO BACK key starts a crossfade to the previous sequence step in the master/sequence connected
to the Master Playback.
• [GO BACK] - Start a crossfade to the previous sequence step in the connected master. Press
GO BACK during an ongoing crossfade to reverse it.
For more information see Master Playback - Playback Keys.
No keyboard equivalent
Console Key - GOTO
The GOTO key is used to crossfade into any existing preset in the Main Playback.
• [#] [GOTO] - Start a crossfade to that preset. If the preset exists in the current sequence, the
step times will be used.
• [SETUP] & [GOTO] - Change settings.
For more information see Main Playback - Transport Keys
and the Goto List.
Keyboard equivalent: [CTRL] & [G]
Console Key - GROUP
The GROUP key is used to store and recall channel selections stored into Groups.
NOTE that the command syntax for selecting groups is different when operating in At Mode. See
Groups - Select channels
.
• [RECORD] & [GROUP] - Record the currently selected channels and levels into the next
free group.