ETC Cobalt 10 - Output Editor - Formats

Cobalt 8.1 - 20181029
260
5. Levels are shown in 8 bits (0-255). Changing Levels are shown with a blue background for
going up.
6. Levels are shown with a green background going down
7. Number of the channel this output is patched to
8. Unpatched outputs
9. A device is held together with a color, and all parameter names are shown for each output.
(See Patch - Introduction
)
Output Editor - Formats
The currently selected format is indicated in the top right corner. You can toggle between these
formats by pressing FORMAT, or from the context menu (touch or click on the current format title).
• All outputs
• Patched
• Un-patched
• Selected
Level of detail
Compact level of detail (Hold FORMAT and press down/up arrow).