Cobalt 8.1 - 20181029
975
Remote Control - Phone Remote
The Phone Remote option allows you to use a standard phone - without a
phone line - to remote control channels and levels.
Connect the base station of a standard wireless phone directly to get a low-level remote control
solution. Activate the handset for an internal call (depends on the system how this is done) and use the
numeric keypad to control channels and levels directly.
Phone Remote - Functions
The handset has two available commands for each key on the unit. Numbers are accessed directly. The
*-key is used as Shift to access the functions. Press the *-key first (do not press and hold) and then
press the function. The #-key when pressed once is decimal point and when pressed twice clears the
number input.
These are the basic functions you can access from the phone remote.
In the table below # means a numbers input, while [#] equals the key # on the handset.
To Next Page
Loading...
