Cobalt 8.1 - 20181029
976
Key Function Feedback
Select a channel
# [SHIFT]
[CHANNEL]
Channel is selected
Add channels
# [SHIFT] [THRU]
Channels are added to
selection
Select a group
# [#] [SHIFT]
[CHANNEL]
Channels in Group # are
selected
Select All
[SHIFT] [ALL]
Selects all channels with a
level that were set from the
remote
Set to Full
[SHIFT] [100%]
Levels for the selected
channels are set to full
Set to 0%
[SHIFT] [0%]
Levels for the selected
channels are set to zero
Set to level #
# [SHIFT] [@LEVEL]
Level # is set for selected
channels
Check mode
[SHIFT] [CHECK+]
[SHIFT] [CHECK-]
Steps to the Next/Last
channel using level.
Load levels from Preset #
# [SHIFT] [PRESET]
Levels from Preset # are
loaded
Clear number input
[#] [#]
Clears number input
Decimal point
[#]
Decimal point
GO
[SHIFT] [Goto/Go]
Next crossfade is started
Goto preset/step
# [SHIFT] [Goto/Go]
Crossfades to preset # or
step # (depending on the
GOTO jumps to setting in
Setup)
Record preset
# [SHIFT] [Record]
Records Preset # into the
Preset List. Only the levels
set from the remote are
recorded
Examples
Turn on channels 2 thru 5 at Full.
[2] [SHIFT] [CHANNEL] [5] [SHIFT] [THRU] [SHIFT] [100%]
Using the decimal point it is also possible to select and turn on channels recorded in groups.
To set Group 1 at Full
To Next Page
Loading...
