ETC Cobalt 10 - Shortcuts - Channel Levels

Cobalt 8.1 - 20181029
933
Shortcuts - Channel Levels
These are keys and shortcuts for setting levels to the currently selected channels. Some of them
assume the Command Syntax is set to RPN - see Channels - Command Syntax.
DESCRIPTION SYNTAX
Set the selected channels to 70%, second press sets
100%
[@LEVEL]
Set a level to the selected channels
[#] [@LEVEL]
Clear and deselect the selected channels
[C/Alt] & [@LEVEL]
Set 100%
[C/Alt] & [+%]
Set 0%
[C/Alt] &
[
-
%]
Increase the level of selected channels 5%
[+%]
Decrease the level of selected channels 5%
[
-
%]
Increase the level of channel # with 5%
[#] [+%]
Decrease the level of channel # with 5%
[#]
[
-
%]
Increase the level of selected channels #%
[#] [.] [+%]
Decrease the level of selected channels #%
[#] [.]
[
-
%]
Set level in internal resolution (0-255)
[#] [.] &
[@LEVEL]
Fetch values to the selected channels from a preset
[#] [ON/FETCH]
Increase level in 1 bit steps
[.] & [+%]
Decrease level in 1 bit steps
[.] &
[
-
%]
Set the last recorded level for the selected channel(s).
[ON/FETCH]