Cobalt 8.1 - 20181029
912
For more information see Master Pages.
There is no keyboard equivalent.
Console Key - PAUSE
The PAUSE key is used to pause an ongoing crossfade in the Main Playback.
• [PAUSE] - Pauses the ongoing crossfade (intensities and attributes) in the main playback.
For more information see Main Playback - Transport Keys
.
Keyboard equivalent: [CTRL] & [P]
Console Key - PAUSE (in Master Playback)
The PAUSE key is used to pause an ongoing crossfade in the Master Playback.
• [PAUSE] - Pauses the ongoing crossfade in the connected master playback.
For more information see Master Playback - Playback Keys
.
There is no keyboard equivalent
Console Key - PALETTE (Alt P)
The PALETTE key is used for recording and recalling All Palettes, containing information from all
parameters in a device.
• [RECORD] & [PALETTE] - Record the next free palette for the currently selected devices.
• [#] [RECORD] & [PALETTE] - Record a new palette for the currently selected devices.
• [#] [PALETTE] - Recall a recorded palette for the currently selected devices.
• [MODIFY] & [PALETTE] - Open the All palette list.
• Hold [PALETTE] - When PALETTE is held, all existing palettes 1-40 can be accessed from
the direct select keys.
For more information see Devices - Palettes
, Record An All Palette, Device Palettes - Direct Mode.
Keyboard equivalent: [ALT] & [P]
Console Key - PARAMETER
The PARAMETER key in the big Cobalt console is used to set the trackball to Parameter mode,
controlling pan & tilt.
To Next Page
