ETC Cobalt 10 - Main Playback - Transport Keys

Cobalt 8.1 - 20181029
771
Main Playback - Transport Keys
These are the transport keys of the Main Playback.
Function Key
Start a crossfade*
[GO]
Start a new crossfade during an ongoing crossfade
[GO]
Pause a crossfade
[PAUSE]
Crossfade to the previous step
[GO_BACK]
Reverse an ongoing crossfade by making a crossfade to
the previous step
[GO_BACK]
Step (without times) to the next step
[SEQ+]
Step (without times) to the previous step
[SE
Q
-
]
Open the GOTO list**
[GOTO]
Crossfade to any recorded preset on the stored or default
times
[#] [GOTO]
Relocate the sequence from preset # in B (Next)
[#] [JUMP_TO_B]
*When a crossfade is completed there is a beep.Turn this off in the System Settings - System.
**See The Goto List