Cobalt 8.1 - 20181029
908
• [-%] - Subtract 5% from the current channel selection..
• [#] [-%] - Select a channel and subtract 5%.
• [C/Alt] & [-%] - Flash the current selection to 0% (master content will not be affected).
• [#] [.] & [-%] - Subtract that level from the current channel selection.
• [SETUP] & [-%] - Change the default level.
For more information see Set Channel levels
.
Keyboard equivalent: [CTRL] & [MINUS]
Console Key - MODIFY
The MODIFY key is central for a lot of functions. It is both the equivalent of an ENTER key and part
of a syntax in combination with other keys.
• [MODIFY] - Answer dialogues, activate choices, enter numbers, open lists, activate text
input in text cells.
• [MODIFY] & [PRESET] - Opens the Preset List.
• [MODIFY] & [GROUP] - Opens the Group List.
• [MODIFY] & [SEQ] - Opens the Sequences List.
• [MODIFY] & [DYN EFFECT] - Opens the Effect List.
• [MODIFY] & [FOCUS] - Opens the Focus Palette List.
• [MODIFY] & [COLOR] - Opens the Color Palette List.
• [MODIFY] & [BEAM] - Opens the Beam Palette List.
• [MODIFY] & [PALETTE] - Opens the All Palette List.
• [MODIFY] & [U1-U3] - Opens the Wheel Parameter Lists.
• [MODIFY] & [PARK] - Opens the Park List.
• [MODIFY] & [NOTE] - Opens the Notes List.
• [MODIFY] & [master key] - Opens the Master Editor.
This key is so fundamental it is described everywhere in this manual.
Keyboard equivalent: [ENTER]
Console Key - MODIFY SEQ
The MODIFY SEQ key is a soft key in the MISC menu of the main display. It is used to toggle the
Modify Sequence mode on or off (default). When Modify Sequence is on, you can advance the
sequence in the main playback without triggering auto times or wait times and master links.
• [MODIFY SEQ] - Toggle this mode on/off.
For more information see Sequences - Build & Modify Modes.
There is no keyboard equivalent
To Next Page
Loading...
