ETC Cobalt 10 - Console Key - TYPE; Console Key - U1-U3; Console Key - UNPARK

Cobalt 8.1 - 20181029
926
Keyboard equivalent: [F12]
Console Key - TYPE
The TYPE key is used to change type of data in the Direct Select key sections.
• Hold [TYPE] - When this key is held, you can use the direct select keys to select a type
(Group, Focus, Color, Beam, Auto Group, Screens, etc) for each section of direct select keys.
For more information see Direct Select - Content
.
There is no keyboard equivalent.
Console Key - U1-U3
The U1-U3 soft keys in the EFFECTS soft key menu, and in the frontpanel of Cobalt, are used to
select user parameters for the selected channels or effects.
• [U1-U3] - Selects this parameter set.
• [MODIFY] & [U1-U3] - Opens the parameter editor for U1-U3.
• [C/Alt] & [FOCUS - COLOR - BEAM] - selects U1-U3 in Congo Jr.
For more information see Device Control - U1-U2-U3
There is no keyboard equivalent
Console Key - UNPARK
UNPARK is used to unpark a channel or part of a channel.
• [UNPARK] & [CHANNEL] - Unparks intensity and attributes of the selected channel(s).
• [UNPARK] & [@LEVEL] - Unparks intensity of the selected channel(s).
• [UNPARK] & [ATTRIB] - Unparks attributes of the selected channel(s).
• [UNPARK] & [FOCUS] - Unparks focus attributes of the selected channel(s).
• [UNPARK] & [COLOR] - Unparks color attributes of the selected channel(s).
• [UNPARK] & [BEAM] - Unparks beam attributes of the selected channel(s).
• [UNPARK] & [Wheel_Key] - Unparks the attribute of the selected channel(s).
For more information see Park- Un-parking values
.
Keyboard equivalent: None