ETC Cobalt 10 - Console Key - CHASE; Console Key - CHECK; Console Key - CLEAR CHANGED

Cobalt 8.1 - 20181029
890
• [#] [CH TIME] - Record that time to the currently selected channel(s).
For more information see Sequence Times - Channel Times
.
There is no keyboard equivalent.
Console Key - CHASE
The CHASE soft key in the EFFECTS soft key menu, is used to open the editor for chase effects.
• [CHASE] - Opens the CHASE editor.
• [#] [CHASE] - Opens the CHASE editor focused at chase #.
For more information see Chase Effects
There is no keyboard equivalent
Console Key - CHECK +
The CHECK + key is used for the Channel Check function.
• [CHECK +] - Make a channel check to the next channel with the current level.
No keyboard equivalent
Console Key - CHECK -
The CHECK - key is used for the Channel Check function.
• [CHECK -] - Make a channel check to the previous channel with the current level.
No keyboard equivalent
Console Key - CLEAR CHANGED
CLEAR CHANGED is a soft key in the DEVICE menu of the console main display. It is used
together with the attribute record setting "Changed" to clear the Set Changed flag on parameters that
have been changed, so they will not be recorded.
• [SET CHANGED] & [PALETTE] - Set all parameters for the selected channels to not
changed.
• [SET CHANGED] & [FOCUS] - Set Focus parameters for the selected channels to not
changed.