ETC Cobalt 10 - Attribute Delay Times

Cobalt 8.1 - 20181029
649
Attribute Delay Times
These functions will work in the Live Attribute Editor and the Preset Attribute Editor.
Action Key Feedback
1. Open the Delay row
[FORMAT] &
[Down_arrow]
[Down_arrow]
or
[FORMAT] &
[DELAY]
The Delay row is opened
under each cell
2. Select Attribute delay
cell(s)
Arrow keys The cell(s) is highlighted
3. Set delay time #
[#] [MODIFY]
The delay time # is set to
the selected cell(s)
4. Update Preset
[UPDATE]
Only needed in Live
Attributes Editor.
NOTE
Delay times can be set to the selected devices also by holding DELAY and
pressing FOCUS, COLOR or BEAM.