Cobalt 8.1 - 20181029
939
Master control functions
DESCRIPTION SYNTAX
Activate the Master View*
[MASTER]
Open the Master Editor.
[MODIFY] & [Master_Key]
Set an individual flash level (in flash mode)
[#] [FLASH_MODE] &
[Master_Key]
Toggle a master on/off
[START] & [Master_Key]
Toggle master # on/off
[#] [START]
Fade a master to a specific level
[#] [START] & [Master_Key]
Hold FLASH MODE and press master keys to
toggle modes. Use PAGE +/- to select
functions.
[FLASH_MODE] &
[Master_Key]
Connect a master playback to the Master
playback
[CONNECT] & [Master_Key]
Tap tempo for sequence on a master (hold tap
and tap Master key).
[TAP] & [Master_Key]
*You can also click on the Master View node in the Browser.
Shortcuts - Masters & Channels
Functions for selecting channels to and from Master Playbacks.
DESCRIPTION SYNTAX
Select the channels of a Preset/Group in a
Master Playback.
[Master_Key]
Add channels of a Preset/Group in a Master
Playback to the channel selection
[+] & [Master_Key]
Subtract channels of a Preset/Group in a Master
Playback from the channel selection
& [Master_Key]
Select channels of a Preset/Group in a Master
Playback which are active on stage
[ALL] & [Master_Key]
Load the selected channels and levels one by
one to Master Playbacks.
[CHANNEL] & [Master_Key]
Load the selected channels and levels as a
group to a Master Playback.
[GROUP] & [Master_Key]
To Next Page
Loading...
