Cobalt 8.1 - 20181029
829
Load a chase sequence to a master
These functions are used to load chase mode sequences to masters.
Function Keys Feedback
Load a chase
[#] [SEQ] &
[Master_Key]
Chase # is loaded to the
Master Playback. The
number and name are
shown in the master
display.
Load several chases
[#] [SEQ] &
[Master_Keys]
Hold SEQ and keep
pressing new Master keys
to load the next stored
Sequence/Chase.
NOTE
You can load a Chase directly from the Sequences List as well. See Sequences
List - Insert/Delete/Load.
NOTE
Connect a Master to the Master Playback controls to get more control over
the Chase. See Master Playback.
Master settings for chase mode sequences
These are the settings you can change for masters with sequence content.
Hold SETUP and press the Master key to open the settings.
To Next Page
Loading...
