Cobalt 8.1 - 20181029
437
Sequence - Assign Fade Curves
Assign curves to a sequence step in the Sequence Editor.
Action Key Feedback
1. Open the Sequence
Editor
[MODIFY] &
[PLAYBACK]
The Sequence List is
opened.
2. Move to the column
"Fade Curve"
Arrow Keys The cell is highlighted
3. Open the Fade Curve
popup
[MODIFY]
The popup is opened. If no
curves are defined it will
only have "No curve".
4. Select a Curve Arrow keys The selected curve is
highlighted
5. Confirm
[MODIFY]
The popup is closed and the
selected curve is assigned
to this step.
To Next Page
Loading...
