Cobalt 8.1 - 20181029
474
Channels - Used & Unused
You can create a selection of channels based on if they are used or not in the sequence loaded to the
Main Playback.
Action Key Feedback
1. Open the Channel
Selection Wizard
[WIZARD] &
[CHANNEL]
A popup with the Channel
select wizard is opened.
2. Select UNUSED or
USED
[MODIFY]
This is a choice in the
dropdown menu.
3. Select the Start and Stop
ranges
Arrow keys This is default set to the
first and last step of the
Sequence.
4. Execute the selection Based on your choice all
unused or used channels of
the sequence loaded to the
Main Playback are
selected.
To Next Page
Loading...
