ETC Cobalt 10 - Device Palettes

Cobalt 8.1 - 20181029
620
Device Palettes
Moving Device values can be stored in Palettes, that are used to recall these
values. Palettes can be stored in Presets, as references to the stored values.
Palettes are organized in parameter groups (Focus, Color, Beam, All).
This chapter contains the following sections
• Device Palettes - Introduction
• Device Palettes - Record
• Device Palettes - Update
• Device Palettes - Edit
• Device Palettes - Lists
• Device Palettes - Activate By Number
• Device Palettes - Direct Mode
• Device Palettes - In Masters
• Device Palettes - Select Active Channels
• Device Palettes - Select Stored Channels
• Device Palettes - Display List
• Device Palettes - Focusing Mode
• Device Palettes - Renumber