ETC Cobalt 10 - Sequence Step Links - Shortcut; Sequence Step Links - Master Pages; Sequence Step Links - Another Step

Cobalt 8.1 - 20181029
395
*In the Sequences - List.
NOTE
All functions in the Master Link list are the same as in the View Masters list.
The only differing one is Target, which is the level the Master will fade to. To
load a Master for manual operation, set the target level to 0%.
Sequence Step Links - Shortcut
There is a shortcut for inserting a Master Link directly to the current Sequence Step in the Main
Playback.
Function Key Feedback
Insert link
[INSERT] &
[Master_Key]
Master # is inserted as a
link to the Step in A.
Insert link with target
[#] [INSERT]
&
[Master_Key]
Master # is linked, with its
current content, and a target
level of 100 or 0%
depending on earlier links.
Sequence Step Links - Master Pages
You can insert a link to a master page.
Function Key Feedback
1. Select the MastPage
column*
Arrow keys The column is highlighted
2. Insert a link
[#] [MODIFY]
Master Page # is linked. It
will be loaded to Masters 1-
20 when this step is loaded
to the B (Next) playback.
*In the Sequence List.
Sequence Step Links - Another Step
NOTE
Links to another sequence step are used mainly to create playback loops.
Links are NOT used to change a playback order in Cobalt - this is done by
cutting and pasting a step in a different location. See Copy, Cut & Paste.