Cobalt 8.1 - 20181029
325
Groups - Record
There are three ways to record a new group. Only selected channels are recorded. The selected
channels can have a level, but it is not necessary.
Function Key Feedback
Record
[RECORD] &
[GROUP]
You will get a popup where
you confirm recording this
group, and can write a text
label.
Record as...
[#] [RECORD] &
[GROUP]
You will get a popup where
you confirm recording this
group, and can write a text
label.
Record with Direct Selects
[RECORD] &
[direct_select]
You will get a popup where
you confirm recording this
group, and can write a text
label.
NOTE
The order in which the channels were selected is stored with the group.
900-groups
900 groups is a remnant from the eighties, when consoles often never had more than 900 channels. To
be able to access user definable channel groups from a remote control for focusing, an exception was
made for these presets. In Cobalt groups 1-999 are available instead. If an play with 900-groups is
imported they will be converted to Cobalt Groups.
To Next Page
Loading...
