ETC Cobalt 10 - Masters - Commands; Select Masters and Set Levels; Master Single Field Editor

Cobalt 8.1 - 20181029
798
Masters - Commands
Enter the number of a master and press MASTER to control this master on the level wheel. This will
open the Master view - and this view has to be open for all the master commands to work.
You can select a group of masters and set levels numerically from the keypad, similar to how
channels, effects and groups can be selected.
Select masters and set levels
It is possible to select masters and set levels with the MASTER key providing a Master View is open
and active (selected).
Keyboard shortcut = F8.
Function Keys Feedback
Open the Master view
[MASTER]
The Master View is
opened.
Select a Master
[#] [MASTER]
Master # is selected and
highlighted in the Master
View.
Add
[#] [+]
Master # is added to the
selection.
Add a range
[#] [THRU]
Up to Master # are added to
the selection.
Subtract
[#]
[
-
]
Master # is subtracted.
Set a level
[#] [@LEVEL]
The levels are set to #.
Set a level
[Wheel]
The levels are set to #.
Deselect all
[0] [MASTER]
All are deselected.
Master single field editor
Hold MODIFY and press aMaster key to open a single field master editor for channel intensities. All
channel functions plus UPDATE are available.