ETC Cobalt 10 - Presets - Compare Mode

Cobalt 8.1 - 20181029
358
Presets - Compare Mode
The COMPARE soft key allows you to temporarily toggle the current light in the active field with the
recorded version of a preset in the active field. When Compare mode is active it is indicated in the top
of all screens.
(Soft Key Pages
are commands in the lower right corner of screen 2)
Action Key Feedback
Compare to stored
[COMPARE]
The last stored version will
be loaded. Press
COMPARE to exit
Compare mode.
Compare to preset
[#] [COMPARE]
The selected preset will be
loaded. Press COMPARE
to exit Compare mode.