ETC Cobalt 10 - Console Key - DEVICE; Console Key - Direct Select Pages; Console Key - EFFECT

Cobalt 8.1 - 20181029
894
• [DELETE] - Delete the selected object in any list.
For more information see Editing In Lists
.
Keyboard equivalent: [DEL]
Console key - DEVICE
The DEVICE key is used to activate Device Mode, and to open the Device List, where you can edit
the settings for all moving devices.
• [DEVICE] - Activate Device Mode for the pots.
• [SETUP] & [DEVICE] - Open the Device Mode settings.
• [MODIFY] & [DEVICE] - Open the Device List settings.
For more information see Device Control - Device Mode
, Patch - Device List.
Keyboard equivalent: [D]
Console Key - Direct Select Pages
The five Direct Select Page keys will activate a user setup that is auto-stored for the Direct Selects.
• Press any of the five keys to access that page.
For more information see Direct Select - User Setups
.
There is no keyboard equivalent
Console Key - EFFECT
The EFFECT key is used to operate the effect playbacks for chase, content, image and dynamic
effects.
NOTE that the command syntax for effects is different when operating in At Mode. See Effects -
Command Syntax
.
• [EFFECT] - Open the Live Effects tab.
• [#] [EFFECT] - Select effect playback #.
• [INSERT] & [EFFECT] - Insert a new effect playback.
• [#] [EFFECT] & [CHANNEL] - Select all channels in effect #.
• [EFFECT] & [ALL] - Select all effects over zero %.
For more information see Effects
.
Example: Build a Chase effect
.