Cobalt 8.1 - 20181029
204
Specific playback settings
Function Explanation Default
value
Disable PB Rubberband Disables attributes from the faders of the
Main Playback.
Off
Always start Dynamics on
Go
Sets Dynamics to start on Go regardless of
other settings.
Off
Don't loop Sequence At the end of a Sequence it will not restart at
step 1.
Off
Don't advance Playback Crossfades will not advance any sequence
steps automatically.
Off
Show sequence numbers Display of Sequence Steps in the Playback
tab.
On
Designer summary shows
data from
Designer summary shows data from A or B A
Solo affects Main PB Allows Flash Solo mode on masters to affect
also the output from the Main PB.
Off
Auto-stop Dynamics in PB Loading a new Sequence to the Main
Playback stops all running Dynamics started
from the current Sequence.
Off
Alert Alarm Time The time at which the warning (yellow and
beep) will be issued before the Alert time is
finished.
5
Beep on Alert Audio Alert warning. On
To Next Page
Loading...
