Cobalt 8.1 - 20181029
216
UDP Strings
UDP (User Datagram Protocol) is a communications protocol where messages are exchanged between
computers in a network that uses the Internet Protocol (IP). See UDP data
.
In Cobalt UDP allows you to use the Ethernet network to:
• Receive Cobalt specific Action Macros directly from another unit, without having to first
create a trigger and event.
• Send any proprietary string of data to another unit that can receive commands over UDP
Function Explanation Default value
Input Port The Input Port Cobalt listens to 0
Output Port The Output port Cobalt sends to 0
Output IPs The Output IP(s) Cobalt sends to,
add multiple and separate with
semicolon ";".
0
To Next Page
Loading...
