Cobalt 8.1 - 20181029
476
Load channels
Action Key Feedback
Load selected
[PRESET] &
[Wheel_Key]
The selected channels are
loaded as a channel group
to the wheel.
Load selected
[GROUP] &
[Wheel_Key]
The selected channels are
loaded as a channel group
to the wheel.
Load group
[#] [GROUP] &
[Wheel_Key]
The channels of Group #
are loaded to the wheel.
Load selected
[CHANNEL] &
[Wheel_Key]
The selected channels are
loaded as a channel group
to the wheel.
Load channel...
[#] [CHANNEL] &
[Wheel_Key]
The channel # is loaded to
the wheel.
NOTE
The channels affected by a group wheel are updated when they are selected.
This means that if the level has changed (by a crossfade or a manual change
of some kind), the group wheel will now always catch up. The
overflow/underflow information will therefore be lost if you are taking
multiple channels over 100% or under 0%.
NOTE
In a client setup with multiple users each client will have individual settings
for group wheel mode.
To Next Page
Loading...
